——Features——

Semi automatic line: the wheel loader will put different aggregates in the Batching Station, it will measure them to the required weight and then combine with the cement from cement silo. All of the materials will then be sent to the mixer. After being mix evenly, the belt conveyer will convey the materials to the Block Making Machine. The finished blocks will be transferred to the Automatic Stacker. Then the fork lift will take all pallets of blocks to the curing chamber for curing. And pallet tumbler can get rid of the pallets one by one and then Automatic cuber will take the blocks and stack them to a pile, then the fork clamp can take the finished blocks to the yard for sales.

——Component——

1 Batching and Mixing Plant

The batching and mixing system consists of a multi-component batching station which automatically weighs and conveys the aggregate to the compulsory mixer. The cement is transported from the cement silo using a screw conveyor and automatically weighed at the mixer. Once the mixer has completed its cycle the concrete will be transported using our overhead skip system to the fully automatic block machine system.

2、Block machine

The concrete is pushed into place by a feeder box and spread evenly into the bottom female mould. The top male mould is then inserted into the bottom mould and the use synchronized table vibration from both moulds to compact the concrete into the desired block. The machine can have a fully automatic face mix section added to allow the production of colored pavers.

Optional block machine models: Hercules M, Hercules L, Hercules XL.

3、Stacker

The fresh blocks are cleaned to make sure they are all the same height and then transported to the stacker. Then the fork lift will take all pallets of blocks to the curing chamber for curing.

4、Un-stacker

When the pallets have been fully loaded into the un-stacker is automatically unloaded on to the pallet return system and aligned ready for the cubing system.

5、Automatic Gantry Type Block Cubing System

The cubing system will collect the blocks or pavers from two pallets at a time and cross stack them onto the exit conveyor. It is equipped with four rubber covered clamping arms and hydraulically operated with 360 degree horizontal movement.

——Semi Automatic Production Line——

Compulsory mixer

Automatic batching station

Wrapping machine

Pallet turn over

—— Production Capacity——

★Other brick sizes not mentioned may provide drawings to inquire about specific production capacity.