In the current society, we see that more and more building materials have used non fired brick. It is an inevitable trend that non fired brick will replace the traditional red brick with its advantages of good quality and environmental protection. Now the domestic market of free burning brick machine is very active. Many people want to invest in this industry. Here I will briefly introduce several problems of investment in non burning brick machine factory.

1. What kind of raw material is the lowest cost to produce unburned brick? How does it compare with the cost of clay brick?

In fact, it depends on where you are. If there are industries in your factory that can produce fly ash, slag, sand, ten, slag and other wastes, it is not a problem. Which material is the cheapest and the most abundant is to use this material to produce unburned bricks. Of course, transportation factors should be considered. Compared with the traditional clay brick, the production cost of the non fired brick is lower than that of the clay brick. In addition, our country has preferential policies. Because of the environmental protection of non burning bricks, we have implemented tax exemption for non burning brick factories. On the contrary, we have imposed a wall reform fund on clay buildings to subsidize non burning brick factories. This kind of price difference is self-evident.

2. What is the strength of unburned brick compared with clay brick? How about the service life?

Clay brick is generally 75 to 100, and the unfired brick is produced in strict accordance with the standard, the strength exceeds the national standard, and the maximum compressive strength can reach 35MPa. We know that the main raw materials of unburned brick are mainly industrial wastes such as fly ash and so on. Their reactive reaction is strong. The calcium silicate hydrate and calcium aluminate gel produced during the production process fill gaps, enhance adhesion, and have long durability, corrosion resistance and stability. In terms of service life, through a large number of tests, it is proved that the later strength of unburned brick will be stronger and stronger, and its service life is far stronger than that of clay.

3. How to choose equipment for investment in non burning brick factory?

First of all, the choice of equipment depends on your pocket. How much money you have should be based on this, and of course, it should be configured according to market conditions. In addition, according to the experience of some non burning brick machine factories in China, it is found that sometimes it is not the bigger the equipment, the better the automation is. On the contrary, sometimes a few small production equipment can handle a lot of work. This is because when large-scale automation equipment is used for production, if one link fails, it will be shut down completely; while for many small-scale production equipment, if one fails, the rest can continue to produce. Therefore, it depends on the specific situation of what type of equipment and how large the equipment is.

4. How to select the site for building a non burning brick machine factory?

The site selection of brick machine factory should be close to the waste residue resources as far as possible, which can greatly save the raw material freight and loading and unloading costs; choose the place with convenient water and electricity and transportation, so as to carry out production and sales as soon as possible; choose the suburb or the place far away from the residential area as far as possible, so as to avoid some unnecessary disputes; rent the old workshop, site or the brick fired factory which has stopped production It can reduce the cost of investment.